ميزات التصميم
1. تتمتع بمرونة جيدة ، مما يجعلها مريحة واقتصادية. يمكن لف الأنابيب المنتجة وثنيها أثناء البناء لتقليل استخدام تجهيزات الأنابيب وتقليل تكاليف البناء.
2. انخفاض درجة حرارة التكسير الهش. يتمتع الأنبوب بمقاومة ممتازة لدرجات الحرارة المنخفضة - ، لذا يمكن بناؤه أيضًا في حالة درجات الحرارة المنخفضة في الشتاء ، ولا يحتاج الأنبوب إلى التسخين المسبق عند الانحناء.
3. مقاومة كيميائية جيدة وعمر خدمة طويل.
4. التكيف البيئي الجيد ، الوزن الخفيف ، المرونة الجيدة ، ويمكن توفيره في ملفات.
5. بشرط أن تكون درجة حرارة العمل 7 0 درجات مئوية والضغط 0.4 ميجا باسكال ، يمكن استخدامها بأمان لأكثر من 50 عامًا.
6. لا يتم إضافة أي مواد مضافة سامة إلى الأنبوب أثناء عملية الإنتاج. الجدار الداخلي أملس وغير متقشر ولا - يتكاثر بالبكتيريا ، والتي يمكن استخدامها بأمان في نقل مياه الشرب وغيرها من المجالات.
نطاق التطبيق
The application of PE-RT pipes in the field of cold and hot water pipes in buildings in my country has developed rapidly, and the raw materials have also further developed. In 2002, the industry-standard "heat-resistant polyethylene (PE-RT) piping system for hot and cold water" was released, but because the industry standard at that time was based on the German standard "heat-resistant polyethylene (PE-RT) piping - general quality requirements" " and "Heat Resistant Polyethylene (PE-RT) Pipes - Dimensions", both of which are based on the performance indicators of Type I PE-RT materials. With the development of materials, the performance indicators of type II PE-RT materials have been much higher than the first-generation materials, and the international standard ISO22391 "heat-resistant polyethylene (PE-RT) piping system for cold and hot water" has also been revised and updated. , adding requirements for Type II PE-RT piping. 1
مع تطور المواد ، تم تحديث أنابيب PE - وترقيتها إلى أنابيب PE - RT II ، والتي تنقسم إلى ثلاثة أنواع وفقًا لمؤشراتها:
1. البلمرة المشتركة للإيثيلين والأوكتين - البولي إيثيلين المقاوم للحرارة - (C2 زائد C8) ؛
2. البلمرة المشتركة للإيثيلين والهكسين - البولي إيثيلين المقاوم للحرارة - (C2 زائد C6) ؛
3. بولي إيثيلين مقاوم للحرارة - (C2 + C4) تمت بلمرة مشتركة مع الإيثيلين والبيوتين
The launched (PE-RT Ⅱ type pipe) material is suitable for industrial and civil building cold and hot water pipeline systems, drinking water systems, thermal embedded pipes, ground radiant heating systems, and high-temperature ground source heat pump systems, especially in northern applications. In the secondary pipe network of urban heating system - PE-RT II type prefabricated direct buried thermal insulation pipe.











